With the development of the logistics and warehousing industry, Plastic injection crate mold have been paid more and more attention as an important storage and handling tool. The demand for cola is increasing, so how to produce good cola turnover boxes?
1): A key point of the cola crate mold is that the product cannot be eccentric. Once the eccentricity is not conducive to the production of the product, it is not conducive to the service life of the mold. Therefore, during the design, there must be wear-resistant blocks on the fixed mold side of the mold for adjustment, and The core inserts on the moving mold of the cola turnover box mold must be locked by Speck, and the benchmark must be done during processing.
2): The cola crate mold also has the problem of demoulding. If you do not pay attention to the polishing in the last program after the mold is processed, there will be side pulls on the side of the cola turnover box during the later mold test. Therefore, after the processing is completed After polishing, it must be hand-painted along the demolding direction and then polished, so as to ensure that the product can be smoothly removed from the product.
3): A very important factor of the cola crate mold is cooling. In addition, the wall thickness of the four corners of the cola turnover box product is different, which is thicker than the overall wall thickness, so the four corners are usually thicker. The beryllium copper is used to increase the cooling speed of the cola turnover box mold, which can greatly shorten the molding cycle of the cola turnover box, which is beneficial to production efficiency.
If you have a product that needs to be a mold, please contact us at any time, Aojie will serve you wholeheartedly!
Post time: Apr-13-2022